Categories
Cleaning Eco-friendly Apartments Kitchen

7 ultra useful tricks to eliminate bad smells of the kitchen

The kitchen is usually one of the places in the house where bad odors condense. Be it in the fridge, the sink, the garbage, the oven or the environment itself, there is always some unpleasant smell to combat. With these 7 tricks to eliminate bad smells in the kitchen, entering it will be a pleasure, even if you have just finished frying!

Heat a little vinegar until very hot, and add a mixture of coarse salt and baking soda, and immediately pour it into the sink.

The secret in most cases is the lemon , this nutritious and complete fruit. We have already taught you 9 uses for lemon peel, today we will see how to use it, along with other products, to eliminate bad smells in the kitchen.

Do you want to know our perfumed secrets?

1st trick: Microwave oven

This trick works with any citrus fruit. We take a glass container that can go in the microwave, and put a large lemon, or an orange or half a grapefruit, chopped inside. Then we fill the container with hot water halfway. We put the container in the microwave, and cook for 5 minutes. If at the end of the 5 minutes the smell is not gone, we continue for 1 or 2 more minutes. In addition, the steam will help us clean difficult splashes from the walls or the oven door.

2nd trick: Traditional oven

We can combat the bad smell of the oven by cleaning it with water and vinegar, then we squeeze half a lemon in a glass of boiling water and put it inside the oven. We can also boil the peel of a lemon, put the still hot water in a glass and leave it for a few hours in the oven.

Trick 3: Refrigerator

To eliminate bad smells from the fridge, we have several tips:

If you want to reduce the smell of fried, before starting to fry add lemon peel to the pan with the oil

To keep the refrigerator clean and odor-free, it is advisable to clean it with water and vinegar.

Put a bowl of cut citrus fruits (lemons or oranges) on the back of the fridge, against the back wall. We can use the lemons or oranges already squeezed, or put new ones. In a couple of days the smells will disappear, and in their place there will be a fresh perfume.

Leave a glass of baking soda at the corner of the fridge, as it absorbs odors.

Don’t throw away the empty coffee container; if you put it in a corner of the fridge, it will absorb odors. You can also use the leftover coffee already made.

4th trick: Garbage

The easiest way to avoid the bad smell coming from the garbage is… take out the garbage! Of course, we can also take some precautions to prevent the bad smell from forming, such as sprinkling the bottom of the bag with baking soda, or putting a few pieces of lemon. If what smells is the cube, we can wash it with a solution of 4 parts of water and one of lemon juice.

5th trick: Dishwasher

To avoid bad smells in the dishwasher, put the dishes inside without food residues. Once the wash cycle is finished, leave the door open for a while and go over the inside with a sponge soaked in water and vinegar. Put half a fresh lemon inside the dishwasher, and every so often, run an empty wash cycle with vinegar and baking soda.

6th trick: Smell of fried

If you want to reduce the smell of fried, before starting to fry add lemon peel to the pan with the oil. You can also cut an apple and dip a slice in the oil; when it turns black, you change the slice. Once you have finished frying, wash the pots and the kitchen immediately. If the smell is particularly persistent, bring a saucepan of water with vinegar and some orange peels to a boil.

7th trick: Sink

If even when the sink is empty and clean you still smell a bad smell, there is most likely a clog. There are many remedies, either with industrial products or with home remedies, surely more ecological:

Heat a little vinegar until very hot, and add a mixture of coarse salt and baking soda, and immediately pour it into the sink. This mixture immediately turns white and forms bubbles, it is the effect of the reaction between the products that we have added and the soap or substances that are clogging the sink. Leave it to act for about 20 minutes and then run the tap water.

Mix half a cup of cold water with half a cup of bleach. Pour the mixture into the sink and let it rest covered with the stopper. Leave it to act for about 20 minutes and then run the tap water.

To eliminate bad smells from your home is using liquefied orange or lemon peels and boiled with water. Pour the hot liquid into the sink, the perfume will last all day.
What do you think of these tricks to keep the kitchen free of bad odors? Surely you also have a secret, will you tell us?

Categories
Cleaning Eco-friendly Apartments

How to get rid of cooking smells or frying oil smell in the apartment

Do you fry in your kitchen and never know how to get rid of the smell of frying or cooking odors in your apartment? Don’t you know how to get rid of frying oil smell from clothes? From the house, the kitchen, from your night dress and hair? Sometimes, actually, frying food leaves both the environment and us smelling of fat and fried food and oil. And as much as we clean, that smell does not come out. But this problem can be solved, with some tips that we are going to give you din this article.

Proper Cleaning of Kitchen and Kitchen Tiles

After frying food, you will do a complete cleaning in your kitchen and on the kitchen walls that absorbed the smell of frying. One of the efficient ways on how to remove the smell of frying from these regions is to wipe with a damp cloth with alcohol and a few drops of remover, both in the kitchen and on the walls.

how do you get rid of cooking odors, old cooking oil smell, onion smell in house

Also pass on this cloth in objects that are near the stove, which may have absorbed the smell of frying. But, attention! Use only a few drops of remover, otherwise your kitchen will not smell like frying anymore, but they will gain the smell of the product, which is not one of the most pleasant either, don’t you think?

How to remove the smell of frying with ammonia

This way of removing the cooking odors or smell of frying from the kitchen is a kind of recipe from grandma. Since the smell of ammonia is very strong, it removes any trace of a fatty smell from the kitchen. To avoid burning your hands, protect them with gloves. Mix about 100 ml of ammonia with about 200 ml of water. If you want, you can put a little alcohol as well.

Pass that mixture in all the places where the smell of frying permeated. After that, wipe with a damp cloth with a little bit of fabric softener to get rid of the smell of ammonia, which is very strong and can bother someone.

Give a new perfume in your kitchen: get rid of fried food smell in house

A good suggestion of how to remove the cooking odors or smell of frying is preparing a natural essence to put in your kitchen when you are frying some food. Take a plate, a saucer, or a cup and inside that container place an orange cut in half and the cloves inserted into the pulp of the fruit. This works as a scent.

Leave this recipe near the fire. If the amount of frying is small, the fried food does not give off as much odor (as fries) or if you have a good hood, you may not need to do anything else. The smell of frying will not permeate the kitchen. However, if you have fried in large quantities or fried foods that exhale a lot of odor, that natural flavoring will not completely remove the smell of frying, but it will reduce it a lot.

In the previous case, it is enough to complete the procedure of How to Remove the Smell of Frying taught in the apartment.

how to get rid of cooking smells in small apartment

Natural Perfume to remove old cooking oil smell

Provide a sprinkler and put boiling water, fresh mint or basil leaves in it ; You can place the two species of leaves, if you have at home. You have sprayed the mixture throughout the kitchen and rooms that often smell like grease when you fry something. After frying, sprinkle the flavoring liquid again.

If the frying odor has become too permeated, you may have to finish the How To Remove The Frying Smell process with what you were taught in the first part.

Remove the smell of fat & meat odors with coffee

To get the kitchen smelling again, you can use coffee grounds. Spend coffee in the kitchen, on the kitchen counter, on the walls near the kitchen and other places reached by the smell of frying. Leave the coffee grounds for about 20 minutes. To clean the fluff, wipe it with a damp cloth.

If you have long fingernails, be careful as the coffee grounds can get underneath them. Thus, we recommend that the procedure be done with gloves,

Mixture to remove the smell of frying

Another way on how to remove the smell of frying is to prepare a mixture with vinegar and lemon or orange peels. After frying food, spray that liquid all over the room. He usually really overrides the smell of fat.

Take the Fatty Smell Out of Clothes with Coconut Soap

Take the clothes impregnated by frying and rub the coconut soap on them. Then soak them in water with two caps of rubbing alcohol and a tablespoon of fabric softener. Let the clothes soak in that liquid for about 2 hours. Then rinse. The smell of frying will have come out and clothes can be washed normally by hand or in the washing machine.

Remove Fatty Odor From Clothes With Baking Soda

  • First, rinse oily clothing with cold water. Reserve.
  • Prepare a mixture with a tablespoon of baking soda for 1 tablespoon of soap powder. Put a little water or vinegar and stir to get a paste
  • Rub the smelling pieces with the paste that we have made. Let her act on the clothes for about 30 minutes.
  • After that, rinse the pieces thoroughly and you will notice that the smell of frying is gone.
  • Continue with normal laundry.

Removing the Smell of Frying Clothes with Vinegar

Was the smell of frying so strong that it even permeated your clothes? Then you will have to wash them separately from the other pieces,

A good suggestion is to leave clothes that smell fatty in the sun for about 1 hour. If it’s not sunny, you will heat these pieces with a non-stick iron or a hair dryer.

Then you will soak the clothes for about 2 hours in water, 2 tablespoons of soap powder and an American glass of vinegar.

Rinse the clothes normally and you will notice that the smell of frying came out. If desired, wash again either by hand or in the washing machine.

Remove the Smell of Frying Hair

Frying can also permeate the hair, especially if the person does not use any type of protection to fry food. To remove this unpleasant odor and get smelly hair back, there are several ingredients that you can pass on wet hair, before your regular shampoo. Are they:

Diluted apple cider vinegar ;
Onion cut and mixed in water;
Juice of 1 lemon with yogurt;
Flavoring oils (do not pass on the scalp).
Whichever ingredient you choose to rid your hair of the smell of frying, let them work for about 20 minutes. Then remove them, use your regular shampoo and focus on hydration, however some of those ingredients can leave your locks parched.

Categories
Eco-friendly Apartments Healthy Living Home Garden

5 Tips to Protect Your Home From Fall Pests

When you’re thinking about pests the first step should always be to check with your local pest control expert regarding what pests you are most likely to be dealing with. Click here to check out your local expert.
A professional will help you protect your home and may even tell you about some pests you hadn’t thought about. They don’t have years of experience for nothing! Seriously, click here and find out more now. You can use their advice in conjunction with these 5 tips to protect your home from fall pests.

Tips to Protect Your Home From Fall Pests

1. Look For Entry Points

It’s easy not to worry about tiny cracks in your home but the truth is if you have a large home in your wall you’d seal it up pretty quickly. The same approach needs to be adopted for any gap or crack in your home. You may not be able to fit through it but there are plenty of pests that can.
A little sealant or some cement can quickly take care of any hole and give you peace of mind. Don’t forget to pay particular attention to the areas around your doors and windows.

2. Clear Gutters

Standing water will attract an array of pests, including the dreaded mosquito. To avoid giving them a place to lay their eggs it’s a good idea to clear all your gutters and make sure that all water is draining away smoothly from your home.
You should also check for leaks inside your home and plants outside that allow water to collect on them. Any form of standing water will attract pests, it’s best to eliminate it within 50m of your home.

3. Remove Clutter

The approach of fall is a great time to start tidying the yard. Clutter easily builds up when the yard is used daily. But, clutter represents a home for a pest, especially during the winter when items don’t tend to move around the garden.
During fall you’re less likely to use the outside space, this makes it a great time to start tidying all the items. Put things away that need to be kept and get rid of everything else. Don’t forget this also applies to the inside of your home, clutter inside makes a great nest for a mouse or other pest.

4. Food Storage

Pests need food to survive, depriving them of food will make it more likely that they’ll go somewhere else to live. The best way of doing this is to make sure all your waste goes into a closed bin, the bag is tied when it’s removed, and the bag is placed far away from the house for as short a time as possible. You also need to use food containers to store food. This will prevent pests from being able to get to it.

5. Clean!

Storing your food is great but you need to remember that even a crumb can feed some pests for a week. Clean your countertops down as soon as you’ve finished using them, preferably with a disinfectant spray.
You also need to vacuum regularly and even mop hard floors. Anything that makes your home less desirable to a pest is a good thing!

Categories
Eco-friendly Apartments

Considerations and advantages of solar panels

Many companies carry out the service of installing solar panels in people’s homes. Its activity is based mainly on the sector of renewable energies and energy efficiency. What do we have to take into account before obtaining the energy efficiency produced by solar panels?

When finally, those people who are interested in obtaining the energy efficiency provided by the solar panels, should consider certain aspects prior to the installation of solar panels and in this way, we can take advantage one hundred percent the advantages of placing solar panels at home.

First of all, we must know the performance we can obtain depending on the location of each person, for this we have at our disposal a map that classifies the climatic zones based on solar radiation or annual sunshine hours.

we can take advantage one hundred percent the advantages of placing solar panels at home

Next, if we want to capture the maximum solar radiation, we must orient the solar panels to the south.

Another aspect to consider is the inclination of the panel that will depend on variables such as use or geographical latitude and a fixed value (18º), which will have to be added to it, in order to obtain optimum performance.

It is also necessary that we know the energy consumed to size the number and performance of solar panels to be placed in the proper proportion.

And, finally, the useful life that is guaranteed for solar panels of twenty-five years and their amortization is from seven.

Then, once we are informed about the considerations that we must take into account before installing solar panels , we should only know what advantages this type of installation will bring to our homes.

If we decide to place solar panels at home we get a reduction in the energy we consume, thus reducing our electricity or gas bill. With this reduction we become independent of the electricity network. This independence is obtained only when using batteries, otherwise the dependence will continue to exist, although less than another person who does not have installed the solar panels.

Another advantage we get with photovoltaic panels is that we will need much less energy to run our appliances and lighting.

Also if we currently have an electric car with solar energy we can charge your battery and get a fuel savings.

Another advantage of the installation of solar panels is for people who care about the environment and do not want to contribute to the pollution caused by climate change. The use of solar energy in a house means a saving of almost one ton of CO2 emissions every year.

And finally, if we have installed solar panels on the roof of the house and we want to sell or rent it, the value of our house will increase and our house will be better seen by the buyer.

You only have one last step, make the decision and get in search of companies that install solar panels and you will take advantage of all these advantages that the use of solar energy brings.

Categories
Cleaning Eco-friendly Apartments

Tricks And Tips For Cleaning Of Swimming Pools

The pools are considered the main pieces when it comes to fun and relaxation is our houses when the heat strikes, we can spend a lot of time, entire nights because, thanks to its technological systems, we can have water heated all day at any time of the year. year. But we have to understand that they do not take care of themselves or sustain themselves, there are different processes that we must carry out in cleaning swimming pools to keep the water as pure as possible and in such a way to enjoy a good state of health.

For each specific case we have different methods of pool maintenance, which are usually divided into two groups: manual and automatic is the answer for those who are reluctant to use time to clean pools, in many cases, pools and They are equipped with this type of filtered water system that allows us to remove the leaves and dirt found in the water.

cleaning of swimming pools

The cleaning of swimming pools is not limited to automatic elements that filter leaves or toxins, but also to the chemical treatment that we have to give the water to make it healthy for people.

We are going to leave you some tips that can be very helpful when it comes to cleaning swimming pools, so you can enjoy a much cooler summer and in a safe way.

Before starting to clean your pool, check if you have to make any repairs, because during the winter it may have suffered some deterioration and broken tiles, etc. The best way to fix it is to use epoxy, which adheres very well in the water.

The pool cleaning is now and therefore have to use brushes and acids, but never soap because it can react with chlorine.
It is time to review the purifier. Before filling the pool, it is vital to check that the pump and filters are in perfect condition, as they will be responsible for cleaning the pool every day. Once reviewed, it is advisable to carry out a filtering process throughout the day.
The most fundamental thing is to guarantee the safety of the small children in the house and for this, you can build a wooden fence that surrounds the pool, for example.
It is essential to control the hygiene of the pool and verify that the water has the right quality for the bathroom.

In case of any unforeseen event, it is best to establish a first aid kit near the pool,

Every day, before you start using the pool, it is vital to remove the remains of leaves or other debris that may exist both on the surface of the pool and in the pump basket.
Moreover, every day we must add chlorine, so that the pH of the water is between 7.2 and 7.6. If it has rained, you can double the dose.
When the summer ends, it is not necessary to empty the pool if we do not use it again.

Categories
Appliances Eco-friendly Apartments Renovations

Is It Time To Replace Your Air Conditioning System? What You Really Need To Know

Are you up to date with the latest information in the refrigerant industry? Do you know that refrigerant standards have changed? In fact, you may have to take a closer look at your air conditioning unit if it still operates on Freon or R22. There are many important changes in the HVAC-R industry and these changes will affect the air conditioner units in most of the residences and commercial establishments in this day and age. Freon or R22 was the most popular coolant used in almost 90% of AC units in homes and commercial establishments for many decades. But the substance was found to deplete the ozone layer of the planet. This discovery was made in the mid-1980s. The Montreal Protocol signed by the world leaders in 1987 decided to phase out all substances that deplete the ozone layer – including R22. In fact, the final phase-out of R22 is supposed to be completed in January 2020. After this date, Freon or R22 won’t be available on the market even for the purpose of servicing the current HVAC-R units in the country. That is why every homeowner and office manager should consider replacing R22 in their HVAC-R systems before this date. This article provides information on whether you should replace your air conditioner system right now.

Although R22 is still being manufactured and imported in limited quantities to service the existing units around the country, a pound of R22 has skyrocketed in the recent past. Due to the supply and demand situation on the market, unscrupulous suppliers have stocked up R22 and are charging in excess of $105 per pound of R22 today. The price is supposed to increase even further when the refrigerant is fully phased out in 2020. That is why you should seriously consider replacing your HVAC-R systems if they still run on Freon or R22. There are many methods of facing up to the phasing out of R22 in 2020. Here are some factors that you need to consider before making the decision to replace your HVAC-R systems with units that operate on eco-friendly alternative refrigerants.

If your HVAC system is fairly new and operating perfectly at the moment, you shouldn't be in a hurry to replace it even if it is operating on R22

If your HVAC system is fairly new and operating perfectly at the moment, you shouldn’t be in a hurry to replace it even if it is operating on R22. The most important thing is to implement an effective preventive maintenance schedule to protect the unit from any refrigerant leakages. That way you can prolong the lifespan of the unit for many years to come. You won’t have to worry about replacing the AC system if you can maintain it properly and let it operate smoothly for many years to come. But if your HVAC system is fairly old and operates on R22, you have an imminent problem. What if the system experiences a refrigerant leak? How will you refill R22 when the substance is so expensive? If money isn’t an issue, you can still find R22 on the market at a price of around $105 per pound. But you may find it really hard to come by R22 when the substance is completely banned in January 2020. The price of the substance is supposed to further skyrocket after the ban. Hence, you should consider these facts before making a decision whether or not to replace your existing HVAC-R system with a brand new, energy efficient unit.

If your HVAC-R system is quite old and already giving trouble, the best thing is to replace it with an energy efficient unit that runs on an alternative refrigerant that is environmentally friendly. That way you can easily save a lot of money in the long run. There are many energy efficient HVAC-R units on the market today. Most of these units run on an alternative eco-friendly coolant. You can easily find such a unit by doing a little bit of research on your part. The internet is the best place to perform such research. You will find a host of websites, blogs, and HVAC technicians who are ready to help you make the shift before R22 will be completely phased out in January 2020.

On the other hand, what if your HVAC-R unit is somewhat old but could be used for some time to come. If you own such a unit, the best thing is to replace the R22 in the system with an energy efficient and eco-friendly alternative coolant. This is where you should be very careful when choosing a compatible coolant for your R22 unit. Although there is a dozen of alternative refrigerants on the market today, all of these coolants aren’t compatible with units that run on R22. There are a few coolants that are compatible with R22 units. You should work with a qualified and experienced HVAC-R technician in the area in order to choose such a refrigerant for your system.

TdX 20 is one of the most popular alternative refrigerants on the market today. There are many reasons for the popularity of this alternative substance. The most important reason is the energy efficiency of the substance. In fact, it helps to save more than 25% of the electricity when operating the HVAC system. You don’t have to replace the entire system when shifting to TdX 20 from R22. Replacing only the coolant will do the trick since TdX 20 is compatible with units that run on R22. That is why you should consider shifting to TdX 20 with immediate effect if your old AC system is still running on R22. It is the best way to save your money in the long run. You don’t have to spend money on replacing the entire HVAC unit but only the refrigerant when you decide to use TdX 20 instead of R22. These are important things that you need to consider when it is time to replace your air conditioning systems due to the phasing out of R22 or Freon by the end of January 2020.

Categories
Eco-friendly Apartments Healthy Living

Choosing an air purifier: Purchase guide

Buying air purifiers has become the best way to create a healthy environment, free of any type of particle that can cloud the quality of the air

Power, technology, consumption or size are some of the fundamental characteristics when choosing a good air purifier

Are you thinking about buying an air purifier? Buy a domestic equipment for cleaning and maintenance of indoor air can become a complex and full of doubts, since there are endless models, technologies and features.

If we also want a device that helps us to eliminate bad smells permanently and other environmental problems such as electrostatic cloud, before taking the final step it is important to take into account a series of keys.

In this article we are going to give you some orientations that can be very useful to know in which characteristics to be set to choose the ideal purifier to respond to the different needs. Equally, it is important to choose the device that best suits them as one of the aspects to take into account when finding a good value for money.

Why do I need an air purifier?

The first question we have to ask ourselves is why do we need an air purifier. Beyond the obvious answer, improve the quality of the environment, it is important to be clear that these devices offer excellent results when they have a minimum quality and meet certain requirements, such as the ones we are going to list.

Therefore, a fundamental aspect to take into account is none other than a minimum quality and adequate services. Logically, there is no point in sinning by excess or default. In the same way that a minimum quality is not a sufficient requirement, since the objective is to make a master purchase; that is, the one that allows us to get the most out of these teams based on our needs and budget. Therefore, knowing what we need a purifier for (improving environmental quality, controlling allergies, eliminating bad smells and different types of contamination) is a first step to consider what apparatus we need in aspects as different as power, technologies or, for example, programming possibilities.

What should I expect from these devices?

Once we have determined what needs we have or, what is the same, what points are important for us, whatever the circumstances, we can focus our search more effectively.

In general, our expectations should not be below the advantages offered by the different innovations. Above all, because the incorporation of many of the new technologies does not involve a higher cost and, if it does, it is not especially significant if we look for a durable and quality device, which does not end up being expensive.

The cutting-edge technologies in environmental disinfection , in fact, are currently incorporated into the most efficient purifiers for joint work. Thanks to this we can expect a thorough cleaning, which also ends bad odors and allergies without leaving residues.

Helps eliminate odors permanently and other environmental problems

What do I need to know about technologies ?

The cutting-edge technologies that would be a pity to give up are, above all, ozonation, ultraviolet rays, Hepa high-efficiency filters, along with catalytic filters, charcoal filters and pre-filters , as well as ionization. Luckily, we can easily find devices that incorporate them for a joint or selective use.

The advanced features are another aspect to take into account when choosing the ideal device. Always depending on our needs, the possibility of programming or having smoke sensors or other types of pollution can be a very interesting feature.

What power is needed to be effective?

The power will only be synonymous with efficiency when we consider that it fits the size of the room, regardless of the technologies that are included, another fundamental point to assess its effectiveness.

A power greater than the necessary one will suppose us an unnecessary energetic expense, without for that reason the results are better. In addition, a more powerful device will have a higher price than another of the same characteristics that has a lower power, so we will pay more unnecessarily when, for example, we could acquire another device with more features and adequate power for the same price. On the other hand, the power does not necessarily tell us the energy expenditure, since depending on the technologies that we have available we can make use of the smaller device. In any case, low energy consumption should be one of our premises when choosing one or the other device, depending on the services offered.

How to find a good value for money?

Once we have chosen some of the devices that can best adapt to our needs and budget, we can carry out a final assessment carrying out a comparison of different characteristics.

When analyzing an appliance in this aspect, in addition to the features and technologies do not forget the greater or lesser need for maintenance, energy efficiency, durability and brand support in case of having problems in the future. In this case, having an accessible contact at the level of distributors and / or manufacturers is basic to enforce the guarantee in the best way.

Portability, design, weight, ease of use and automation are other features that will help us make the best choice. Depending on the different requirements and personal preferences we can move forward until we find the device that will best respond to what was expected.

How to solve my doubts?

Before buying it is important to ask practical questions and, in addition to taking into account the opinions of users, seek answers from experts. Instead of staying with the doubts and end up buying intuitively, for example, the most economic device or the opposite, the one that seems better only because it is more expensive, let’s trust in the professional advice.

For this, go directly to trusted manufacturers and distributors. Whether through email, via chat, telephone or in person, they will be happy to meet your requests without any commitment to purchase. Only then you can have good information from which to draw your own conclusions to make the perfect purchase.

Categories
Eco-friendly Apartments

How to choose a quality painting to paint the walls

One of the routines that are part of the partial reform of a home is the work of painting a room. The choice of a quality product is crucial for the time and money invested in this task to guarantee a desired durability since one of the characteristics of this type of resource is its adherence. When you go to the store to choose the best product among the different options available in the market, ask for information about its properties against external aggressions.

Make your purchase in quality stores and choose products especially indicated for the use of interior spaces. Identify what your needs are and explain this information to the professionals who assist you at the store so that they can advise you in an effective way in choosing an ideal painting for your home.

A quality painting is not only observable for the perfect finish, but also for the chromatic quality of aesthetically beautiful colors.

How to choose wall paint

Although quality is always a desirable feature in the choice of products for the home, you can also establish an order of priorities since, if you live in a house, you may have a stay in one of the plants that occupies a secondary place in the coexistence.

There is an important reason why choosing a more expensive paint is a long-term saving: it is not necessary to apply as much product to cover the walls as when using a less excellent material. Therefore, from the point of view of the effort invested in carrying out this task, a quality product is also a good at the service of time management thanks to a pleasant texture that is easy to apply.

A quality painting is not only observable for the perfect finish, but also for the chromatic quality of aesthetically beautiful colors. The quality of a product is evaluated not only in itself, but also in its application. It is important to follow the indications of the product for an effective use of it.

When starting the process of selecting colors, when you find an idea that you like in an image, look for that key in a catalog to have it identified.

Washable paints

There are different types of paints, being the washable ones a good option to increase the aesthetic beauty of the color of a wall in front of the possible damages that can occur with the passage of time. For example, pollution or possible spots. Thanks to this maintenance, you can increase the result of a product type that offers perfect coverage.

The effect of the passage of time produces a visible effect in the material universe, also in the home. However, thanks to the possibility of removing stains from the wall using the right products, it is possible to increase the visual beauty of that place and cleanliness.

How to choose white paint

The white color is still one of the most used to paint the house. In that case, you can apply the characteristic of a washable product in a painting of this hue. You can find proposals of satiny or matt essence. Satin paint produces the positive effect of better reflecting light. On the contrary, a matte product has a greater coverage. The gloss or matt feature refers to the type of finish of a product, that is, the final result. The matte trend acquires prominence in the current decoration thanks to the fact that this proposal adapts perfectly to the essence not only of walls but also of furniture.

Satin paint is not only optimal for walls, but also to cover tiles obtaining a new aesthetic with an elegant result and a perfect finish.

Categories
Eco-friendly Apartments Home Garden

Retaining your garden’s performance in winter and new trends to implement

It’s easy to lose track of your garden from time to time, especially during the winter months. This comes down to the cold shivering weather that puts people off. During the winter months it’s easy for us to retreat to the warmth of the home instead of spending time in the garden, but it still requires a little maintenance during these colder months to ensure that it is fighting fit for the next year.
Here are some handy tips for keeping your garden in great shape for the winter and some predictions for upcoming trends for the year ahead from garden specialists.

During winter, lawnmowers aren’t hardly needed so it is the perfect time to service it. Ensure blades are sharpened and test the engine

Lawn maintenance

Prepare an area for a new lawn in the winter; simply dig out the proposed area making sure to leave some clumps of soil onto the surface. These clumps will then be broken down by the frost creating a great solid base for the new lawn.

On warmer days there will be some growth, this can be kept under control by not feeding the grass. Cut the grass down if it does grow longer than you’d like it to. However it’s recommend only cutting it down by a third. Find the medium as grass that’s too short can have a hard time surviving the winter, whereas grass that is too long can become brittle with the frost.

Stay up to date with moss and weeds, as throughout the winter they can quickly take over your lawn. Rake fallen leaves and other debris onto the lawn for a homely feel to the garden, this will also enable the grass to have more improved access to sunlight.

Winter plant maintenance

Plants that are not killed off from frost prepare to go dormant until the warmer weather arrives. Cut off any blackened stems and clear out any dead foliage such as annual flowers and vegetables to prevent diseases from spreading to other areas of the garden.

For the remaining plants and soil, spread a thick layer of mulch, this will keep the temperature at an even so that the plants can adapt faster without being stressed; fallen leaves from any trees on the property also make a good source of mulch so don’t discard them.

Gardening equipment maintenance

During winter, lawnmowers aren’t hardly needed so it is the perfect time to service it. Ensure blades are sharpened and test the engine. Empty any remaining fuel or check that the electricity lead is well maintained before storing away.

Drain all of your hoses to prevent frost attack and wrap hessian fabric around any external taps and pipe to protect them from the cold.

Tools like lawn edger’s and pruning shears should be wiped fresh and all metal parts sprayed with a lubricant like WD40 to prevent corrosion. Garden spades and forks should be cleaned off after each practise and if stored for a while lubricated with WD40 also.

Upcoming garden trends for the year ahead

Winter enables you time to plan out what to do with your garden, before the weather starts to warm up. It’s beneficial for you and your garden to get ahead with ideas and to assess how long each action is going to take.
If your idea is a big scale type project that will take some time to finish then preparing for it can go a long way. Get ahead, already have at hand the tools and all essentials you’ll need for the garden project.

Berry bushes grown in containers

Bring in and invite colour to your garden with strawberries, blueberries and raspberries, which are all great additions to any garden, if you have no space for a large bush you can try to grow them in pots. Not only will you save up space, but they can be moved to different parts of the garden if needed and are easier to maintain than larger bushes.

Hi tech gadgets

They’re a wide range of technology that can be implemented into your garden. Smart apps can remind you to water your plants and probes that tell you the health of your garden. Smart lights create ambient environments. You can power on lighting in your garden with automatic settings.

Natural landscapes

Maintaining any garden, physically, takes some effort, people are now turning to a more natural landscape by planting in low care shrubs, grass and perennials. This relaxed attitude to gardening can produce a plethora of colours and textures to create a natural landscape which needs very little maintenance.

Garden rooms

Garden rooms are fully insulated and ideal for the cold winter month. Slowly they’re becoming more of a popular choice for home owners, they provide excellent space to carry out any hobbies and activities.

Growing your own herbs

Herbs are among the easiest plants to plant and grow requiring very little treatment. Herbs can be grown in small pots on the windowsill or in bigger pots outside. Whichever herbs you choose to grow you will know that you are getting fresh and flavour packed herbs that are free from pesticides.