Categories
Renovations Repair and DIY

Common Furnace Issues Homeowners Need to Know About

When the weather starts to get cold, you rely on your furnace to keep your home comfortable. Because of this, if a problem occurs, you want to be able to quickly identify it and have it repaired. Homeowners should have basic knowledge about common issues so that you know when to call a professional to consult about furnace repair services.

You Do Not Get Regular Maintenance

One relatively common reason why people require furnace repair services is because they do not take care of regular and proper maintenance of their system. Your heating unit is a large machine with an array of different components and any one of them could wear down or become faulty at some point. Talk to an HVAC professional in your area to determine when a professional inspection should be done. In between these, you can do a quick check of your system on your own to see if any noticeable problems are present.

One relatively common reason why people require furnace repair services is because they do not take care of regular and proper maintenance of their system

You Have Clogged or Dirty Filters

The filter in your heating unit helps to collect the dust and other debris before they are able to get to the mechanical components and cause troubles. You should take a look at this part about once a month when you are using your furnace on a regular basis, such as during the fall and winter. In the summer and spring, check it at the beginning and end of each season.

Some filters can be pulled out and replaced while others are cleaned and then inserted back into the system. When this component is clean and in good condition, air is able to freely circulate without issue allowing your heating unit to function at its most efficient level.

You Have a Gas Leak

This is a dangerous situation that must be addressed immediately. If you ever smell gas in your home, it is important to leave your home, leave the door open and contact the fire department. Unfortunately, gas leaks are not an uncommon problem. Once the fire department inspects your home and furnace, they will let you know that it is safe to contact an HVAC professional to identify the problem and get it taken care of.

Your Pilot is Malfunctioning

Modern furnaces generally have one of two pilots, including an intermittent pilot or a hot surface ignition. If this part is not working properly, you might notice that you have no heat, or the heat is only intermittent, resulting in your home being too cold. No matter the type of heating unit that you have, if there is a pilot problem, it is generally recommended that you do not attempt a fix on your own, but consult a professional instead.

Your System is Not Putting Out Enough Heat

If you turn your furnace on and after a few hours your home is not very warm, this can indicate an issue with any number of components. Start with the thermostat connected to your system and your filter. If these are in good working order, you should consult with a professional because the issue could be related to one of the larger elements, such as the motor or the blower. An HVAC technician can do a thorough inspection, determine the cause and let you know what is needed to make the repairs.

When there is an issue with your heating system, make sure that you do not delay getting it addressed by a professional. The longer problems are allowed to continue, the bigger they might become. This can result in the repairs taking more time and costing more money. It is also important to ensure that you work with a reputable company for the work to make sure that everything is tackled properly and professionally.

Categories
Design Trends and Styles Renovations Repair and DIY

Benefits of Using PlasterBoards to Remodel Your Home

Are you thinking of renovating your home? So do not forget to use plasterboards, which are versatile and give great benefits to your house and its construction. Check your kindness and fall in love with them.

– You can do everything with them: Plaster boards can provide you with varied solutions. Do you want some examples? To make dividing walls, to cover rolls of curtains of curl, to cover damaged walls, to make a ceiling, to lower a ceiling to place more lights , to take a bath and to change of place the artifacts, to solve problems of humidity, to make furniture to measure, between other uses.

Plasterboard to Remodel Your Home

– Dry construction is cleaner : I think we all hate home repairs, because just thinking about the dust from the lime, the cement , the sand, the mixture and the dirt that is everywhere makes us regret before start. But the plasterboard give you the clean much – needed option.

– Fast and Easy: If you hire a person who can place them (today abound) the work will be done quickly and easily. Calculate that you can have a wall ready to paint in just one day.

– They are economical : Both the gypsum boards , the aluminum profiles and the rivets that support them are cheaper than if you built a brick wall .

– They are resistant: You may think that a wall or something built with plaster boards is not very resistant, but I tell you that you will not find any differences with the traditional construction. An extra benefit: crack plaster walls do not crack.

– They are safe : The gypsum boards are fireproof, and there are some that bring additional fire protection for hazardous areas. In addition, there are others that are indicated for places of humidity, which resist mold.

– You can isolate environments from the cold and the noises: If your house is very cold or you need to reduce the noise level that comes from the outside, you only have to cover walls and ceiling with plasterboard and include some insulation between. Nothing simpler.

– They can be bent: And if you’re tired of so many rigid lines, you can find in the versatility of drywall the ideal choice to create curved walls.

Categories
Furniture Design Repair and DIY

Patinated Furniture: Decorative Effect with Painting

Making a patinated on wood is not a complex technique, it simulates an aged with paint, and is indicated for old or economic furniture. The patina is a decorative effect with painting that is done so that the objects look old. But there is no doubt that this well-known technique is beautiful not only for what seems to be, but also for the aesthetic enhancement achieved by the furniture improved with it.

A good way to give new life to the furniture is with the patina technique

It should not be confused with decapate or pickling, which pretends to have the same but more rustic effect and is done in another way, although both techniques can be combined on the same object.

In some cases, the patinated ones give an old feeling with what you can give a new style, but undoubtedly the patinated furniture looks more fresh and jovial. It is a sort of combination between the past and the present, and is perfect for Provencal decor styles, rustic Shabby and Boho Chic .

The step-by-step patina technique

A good way to give new life to the furniture is with the patina technique. It is not at all complicated and can give new airs to the furniture, especially if it deals with the most economical, or old in bad condition. With it it is possible to revive the look of the wood of old recycled furniture.

Step 1: First, clean the surface to be painted, sanding if necessary. Then wipe with a damp cloth to remove any remaining dust from the sanding.

Step 2: Once the surface is clean it is time to apply the first coat of paint. Carefully brush each brush stroke, and remember that there should not be a brushstroke thicker than the other, it is ideal that you take the time to do the work neatly. You should let it dry for a day or two.

Step 3: It is time to apply the second layer of paint, a color different from the previous one, with which the desired effect is created. It is applied irregularly and smoothly so as not to completely cover the anterior layer. It is advisable to load the brush very little. At the moment remove the most amount of paint with a dry cloth, leaving more quantity in the corners and moldings.

If you want to add other shades to any part of the furniture, you can color this white patina with any type of dye, like the universal dye. This combination is what gives you nuances and feel of pickling. To protect the finish, you can finish the job by applying a colorless coat of paint once the previous coatings have dried completely.

Categories
Design Trends and Styles Eco-friendly Apartments Interior Decorating Repair and DIY

Great ideas to take home spaces

That corner behind the door, the sloping roof of the attic. Everyone in particularly difficult spaces to decorate home and apparently have no practical use. If you liked our ideas to transform a wardrobe, you can not miss the suggestions that we offer today to take advantage of the dead space of the house. Corners with many possibilities. Take note!

We have changed our name to cloudbeam Our Home Spaces empowers consumers with their energy

A desk area

Leverage difficult spaces from home can be difficult. It all depends on the characteristics and shape of the room, as well as our needs. Therefore, in DreamyApartment Blog we inspire you with these exciting proposals that are common examples in any home.

A very common case is not sufficient space for a desk area. The solution? Place an outreach shelf at the right height on that wall you do not use, it can be a good choice. If you have some spare and with a depth of at least 35 cm space, you can turn a simple blown into a practical desk shelf. In the bedroom or living room, this idea is almost perfect in any environment.

A kitchen with stools for office

The traditional kitchen counter can also have many other practical uses. For example, as a makeshift office area. Therefore, in DreamyApartment blog we recommend placing a few stools that you can hide under the counter. In this way, we create a new atmosphere in the kitchen and breakfast bar for breakfast and grab a snack, but without detracting too much space.

Shelves near the ceiling

Home Spaces Furniture and Decor

When we decorate usually we think in width. A very common mistake, since high ceilings may also have many other uses. Try placing high shelves and shelves that serve you as a great solution for extra storage. A great idea that will not detract beauty to the environment, whether in the kitchen, in the bedroom, in the locker room and any other room in the house.

The space below the window

In this sense, the space under the window is also a corner that we usually miss and you can have many good uses. From a makeshift library to decorate our favorite books, even a small and comfortable bench to enjoy relaxing moments. Another interesting option could be to place a service unit in which to store clothes and accessories, without sacrificing aesthetics.

Corners with many possibilities

Do other areas especially difficult to take advantage? The corners! In DreamyApartment Blog we recommend placing shelves or a desk furniture tailored to maximize these spaces.

We can also opt for a corner sofa or chaise-longue, a side table with wheels or an ottoman with storage space. In these places, the auxiliary units are a great solution.

Order and aesthetics

Speaking of aesthetics, there are some good tricks to make small rooms look lighter to take home spaces. If you have a shelf built into the wall and would make the room look larger visually, try painting the furniture the same color as the walls of the room. It is a resource widely used by experts in decoration.

Spaces for Home is a one-of-a-kind boutique furniture store

Hangers on the wall and ceiling

Also do not forget the walls as extra storage solution. hangers, hooks and hangers wall can become great allies in order to difficult places like the kitchen. You can place these hooks anywhere, even in furniture, ceiling, behind doors or inside the cabinets themselves.

In DreamyApartment blog we hope our advice will have been useful and inspire you to tap home the most difficult spaces . What other ideas recommend?

Categories
Appliances Repair and DIY

Freezer Maintenance Tasks That You Can Do Yourself

They do a lot of hard work, running quietly in the background, and virtually unnoticed in our kitchens. We expect a lot from our trusty freezers and rely on them to keep food fresher longer. To get the best possible performance out of the appliance and have it working in optimum condition, there are a few simple tasks that can make a big difference to the efficiency of this essential piece of equipment.

Some Quick Vacuuming

The condenser coils are located under the unit or at the back and attract dust which builds up on the coils. This means that the condenser needs to work much harder to keep the right temperature. So task number one on your maintenance list is to unplug the freezer and vacuum the coils. Very simple and takes just a minute or two. Don’t forget to plug the freezer back in!

A Little Wash and Clean

A self-defrosting freezer has a drain hole to remove, and drain pan to collect water formed during its defrosting cycle. Turn off the unit, locate the hole and clean it thoroughly to remove any goo and deposits that have built up around it, and ensure that there is nothing left to clog it. Also give the pan a good wash before replacing it. Another quick and easy task completed. Turn the unit on once again.

The vital role of the seal helps the freezer sustain the right temperature

Speedy Seal and Gasket Inspection

The vital role of the seal helps the freezer sustain the right temperature and if a crack develops then its work will be much harder and less effective. Look carefully for any signs of cracks or other damage in the sealing gasket. A good test is to place a dollar bill in the door and close it, if the bill easily pulls out, then a replacement gasket is needed. If all is well, then a good clean is all that is necessary.

Extra Tips for more Efficient Freezers

Keep the freezer full. They operate more efficiently when full and if a power outage should occur the temperature will hold for much longer than with an emptier freezer. Do make sure though, to leave a little room for air circulation.

Keep seals and gaskets in good shape by wiping a little petroleum jelly over them every now and then. This provides lubrication and helps prevent any cracking or drying out.

Check the recommended temperature ratings and get a freezer thermometer if your freezer does not have one. Check that the temperature is maintained at 0 degrees C or preferably below for best efficiency in freezer operation and the optimum preservation of foods.

These easy tasks only take a few minutes but can make a huge difference in the performance of your freezer and keep your food fresh and tasty.

Categories
Repair and DIY

DIY tips: Painting modern houses

For all that is necessary is recommended for painting modern houses, but few people know how to do, what is worse is that even the color is hard to decide because the possibilities are too many and knowing that is a decision that will endure on our homes several years, the concern is greater.

We’ll help you along the way to paint your home professionally. Let’s make it as simple as possible and step by step.

Step 1: The amount of paint you will need

You can not start without knowing this information, we recommend that before each project knows how much to spend.

Step 2: That color scheme to use

There are so many free software available specialized for this, we offer one that is able to adapt the paint scheme on the photos of your own home, you can download it from here. If you find it too complicated, refer to the following link color combination for modern homes

Painting modern houses

Now you should know exactly which colors to use and how much paint you will need to purchase, we recommend making separate projects, eg first the front of the house, then the project of painting the main hall, then the project of painting a room, so on, this generates a control over any possible waste.

Step 3: Preparing the walls before painting.

The walls are very special and classically especially prefab. What you should do is first cleaned by the best method suited the dirt, dust and grease that contains wall, remove also has peeling paint with a spatula. then wait for it to dry wall.

Once dry the wall you can start painting.

Step 4: How to apply paint effectively

There are three methods to apply paint: Brush, roller and spray guns.
Brushes: If you like this method, then buy four-inch brushes. The main advantage is that you can get to places that difficult to find a roll, and the brushes can be applied much thicker layers.

Rollers: If your wall is completely smooth like modern houses, then you should select a paint roller nine inches, make sure your tray not exceeding one liter of paint. Moisturize and drain all the roller in the tray that has slots.

A disadvantage is that a person who uses the first roller paint can waste to overdo moisture and lift the roll on the floor while dripping. At the end wash it thoroughly with water, if you do not have to buy a new one so do not forget to do it.

color paint

Spray Guns: This method is only for professionals, is the best and fastest method, it could ensure that it is the only method that optimizes the amount of paint used.

Follow these tips and you will see that painting can also be done without professional training by yourself efficiently.

Categories
Repair and DIY

Tips to repair an interior door

The doors as any part of the house deteriorate through use and require a constant maintenance. It is a fact that the sooner note every flaw, the less damage. To repair a door that does not work correctly you must know the problem, then you can do the job properly. For maintaining an interior door, you can do it yourself without having to spend on hiring a specialist by using these tips.

repair a door fix a door

Deformed doors: the deformation of the doors is one of the most common problems are usually due to moisture environment, heat or lack of parking in the wood with which they built the door. If the bend is in the hinge zone, you must strengthen the bond between the sheet (jamb) and the frame, to which add a hinge. Remove the blade of its location and made a hole with a chisel to locate the box of the hinge on the edge of the leaf and the frame. Before removing the blade must mark the position of the new hinge. Screwed the hinge in place and turn to place the door leaf. This should be enough to work perfectly.

Hinges loose: sometimes the door movement causes a game with the hinges, which ends by loosening the screws of the same. This constant movement, enlarge the hole ends in which are inserted the screws, so as to adjust them are not really tight. To solve this problem you must fill the holes. There are several ways to do this padding, the simplest is with white glue mixed with sawdust, works well and adapts to any surface, although the union does not stand too much effort. Another solution is to place a chip or a dowel, this depends on the enlarged hole, usually suffice sliver. If filling does not come loose in a short time, put a little white glue before filling. Then insert the chip and pin (can also be a toothpick), let it dry. Finally place by tightening the screw afterwards.

Doors that stick: when a door jam, there can be many factors that cause it. If the hinge is loose, to repair it, just tighten the screws. If this fails, then put a charge behind one of the hinges. This supplement is simply a piece of thin cardboard. Stand behind the hinge that is opposite to the area that touches the frame. Then cut the area that touches the frame, do it with sandpaper or the carpenter’s plane.

Dents or small holes: when you have deep dents, scratches or holes caused by nails, moth or other cause, fill with wood putty for wood, but it will prevent the filling reaches the surface so that the putty is visible. To cover the putty and give a more natural finish, prepare a paste of the same wood sawdust and white glue. Fill the hole and press firmly to compact. Then let dry and sand it thoroughly with a wet sandpaper. Then apply the paint, or paste wax to cover the settlement.

Wetlands: when the wood has moisture, remove the affected piece of wood and replace it with another piece of the same wood. Treat all the door with a product biocide to kill fungi that may be in another part of the door and to prevent formation of new fungus.